HP B-series 16Gb FC Switches Hardware Reference Guide

A Specifications
This appendix provides switch specifications.
Physical specifications
Table 13 HP StoreFabric SN6500B 16Gb FC Switch physical specifications
ValueDimension
86.74 mm (3.415 in)Height
609.75 mm (24.006 in)Depth
429.25 mm (16.900 in)Width
16.9 kg (37.3 lb)Weight (with two power supplies and three fan assemblies,
and no transceivers installed)
Table 14 HP SN6000B and SN3000B 16Gb FC switches physical specifications
ValueDimension
1U or 4.3 cm (1.7 in)Height
44.3 cm (17.4 in)Depth (without plenum)
43.8 cm (17.2 in)Width (The slightly increased width requires a slim rail
rack mount kit for mounting.)
9.2 kg (20.2 lb)Weight (with two power supply and fan assemblies, and
no SFPs installed)
7.82 kg (17.25 lb)Weight (with one power supply and fan assembly, and no
SFPs installed)
Facility requirements
Table 15 Facility requirements
ValueDimension
Electrical
• Adequate supply circuit, line fusing, and wire size, as specified by the electrical
rating on the switch nameplate
• Circuit protected by a circuit breaker and grounded in accordance with local
electrical codes
See Table 16 (page 66) for complete power supply specifications.
Thermal
• Minimum airflow of 79.8 cubic m/hr (47 cubic ft/min) available in the
immediate vicinity of the switch
• Ambient air temperature not exceeding 40°C (104°F) while the switch is
operating
Cabinet (rack mounted)
• 1U in a 48.3 cm (19 in) cabinet
Use rack kits designed for the extra
width of the switch to mount in
standard cabinets/racks.
• All equipment in cabinet grounded through a reliable branch circuit connection
• Plenum installed to prevent overheating
• Additional weight of switch not to exceed the cabinet’s weight limits
• Cabinet secured to ensure stability in case of unexpected movement
Physical specifications 65