Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

428 Fabric OS Command Reference

53-1001764-01

ifModeSet

Advertise 100 Mbps / Full Duplex (yes, y, no, n): [yes] y

Advertise 100 Mbps / Half Duplex (yes, y, no, n): [yes] y

Advertise 10 Mbps / Full Duplex (yes, y, no, n): [yes] y

Advertise 10 Mbps / Half Duplex (yes, y, no, n): [yes] y

Committing configuration...done.

To force the link for the eth0 interface from autonegotiation to 10 Mbps half-duplex operation, when

entering this command through the serial console port:

switch:admin> ifmodeset eth0

Auto-negotiate (yes, y, no, n): [yes] n

Force 100 Mbps / Full Duplex (yes, y, no, n): [no] n

Force 100 Mbps / Half Duplex (yes, y, no, n): [no] n

Force 10 Mbps / Full Duplex (yes, y, no, n): [no] n

Force 10 Mbps / Half Duplex (yes, y, no, n): [no] y

Committing configuration...done.