Brocade Fabric OS Documentation Addendum - Supporting Fabric OS v5.2.x (53-1000429-01-HP)

1-10 Fabric OS Documentation Addendum
Publication Number: 53-1000429-01-HP
agshow Note: Enter commands in lowercase only; mixed case is for readability
1
agshow
Displays the Access Gateway information registered with the fabric.
Synopsis agshow [ag_name] | [--local]
Description This command displays the details of the F_Ports and the configured N_Ports in the Access Gateway
connected. The lines of display show:
Name The name of the Access Gateway.
Ports The number of ports in the Access Gateway.
Enet IP Addr The IP address of the Access Gateway.
Firmware The version of the Access Gateway firmware running on Access Gateway.
Local/Remote Describes whether the Access Gateway is registered to this fabric locally or
remotely.
Nodename The WWN of the given Access Gateway.
N-Port ID(s) The port ids of the N_Ports configured in the given Access Gateway.
N-Ports The number of N_Ports currently configured and that are online in the given
Access Gateway.
F-Ports The number of F_Ports online in the given Access Gateway.
Attached F-Port information
This gives information on the F_Ports that are connected to the Access Gateway.
Note
NPIV capability should be enabled on the ports connected to the Access Gateway. Use portCfgNPIVPort
to enable NPIV capability on the specific port.
Operands This command has the following operands:
ag_name The name of an Access Gateway registered locally or remotely with this fabric.
Give this option to get the information for that particular Access Gateway. This
operand is optional.
--local Give this option to list the information of locally registered Access Gateways.