HP DC SAN Backbone Director Switch Hardware Reference Guide (5697-2158, August 2012)

NOTE: If you are using the VF feature, run the configDownload -vf command before

running the configUpload command in order to restore the logical switch configuration.

2. Enter the configDownload command.

Server Name or IP Address [host]: 123.123.123.123

User Name [None]: Admin24

File Name [config.txt]: config-switch.txt

Password: xxxxxxxx

download complete

switch:admin>

3. Reboot the DC SAN Director.

Configuring the new chassis serial number

To configure a new chassis serial number:

1. Open a CLI session (Telnet or serial) to the DC SAN Director and log in as root:

The root and factory account disclaimer is displayed.

• Log in using Telnet.

Use the IP address of the DC SAN Director through Telnet and log in as root.

Fabric OS (rsl8-st03-dcx-1)

Password:

Disclaimer for Root and Factory Accounts Usage!

This Fibre Channel switch is equipped with Root and Factory accounts

that are intended for diagnostics and debugging purposes solely by

the Equipment vendor's trained engineers. Improper use of the

functionality made available through the Root or Factory account could

cause significant harm and disruption to the operation of the SAN fabric.

Your use of the functionality made available through the Root or Factory

account is at your sole risk and you assume all liability resulting from

such use. The Equipment vendor shall have no liability for any losses

or damages arising from or relating to the use of the Root or Factory

account (and the functionality enabled thereby) by anyone other than

the Equipment vendor's authorized engineers.

Proceeding with the usage of this switch as the Root or Factory user

explicitly indicates your agreement to the terms of this disclaimer.

rsl8-st03-dcx-1:root>

2. Change the factory serial number to the serial number of the new chassis:

a. Enter the fruInfoSet chassis 1 command at the prompt.

b. Enter the OEM serial number, if any, at the SN prompt.

c. Enter the chassis serial number at the Chassis SN: prompt.

Replacing the DC SAN Director chassis 89