Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-359
Publication Number: 53-1000240-01
nbrStatsClear
2
Note: Enter commands in lowercase only; mixed case is for readability.
nbrStatsClear
Resets FSPF interface counters.
Synopsis nbrstatsclear [slotnumber/][portnumber]
Description Use this command to reset the counters of FSPF frames transmitted and received on each interswitch link
(ISL) or a specific ISL. These counters display using the using the interfaceShow command.
Use this command without operands to reset counters on all interfaces.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
slotnumber For bladed systems only, specify the slot number of the port to display, followed
by a slash (/).
portnumber Specify the port number to display, relative to its slot for bladed systems. Use
switchShow to list valid ports. This operand is optional; if omitted, FSPF statistics
are reset.
When this command is specified with no operand, the statistics are cleared for all interfaces.