Brocade iSCSI Gateway Service Administrator's Guide - Supporting Fabric OS v5.3.0 (53-1000440-01, June 2007)

24 iSCSI Gateway Service Administrator’s Guide

Publication Number: 53-1000440-01

Displaying the iSCSI VT

DISPLAYING LUN MAP CONFIGURATIONS

This section shows how to display the iSCSI VT LUN maps.

To display the iSCSI VT LUN map

1. Connect and log in to the switch.

2. Enter the iscsiCfg

--show lun command as follows:

switch:admin> iscsicfg --show lun

Number of targets found: 2

Target: iqn.2006-10.com.example:disk001

Number of LUN Maps: 2

FC WWN Virtual LUN(s) Physical LUN(s)

21:00:00:04:cf:e7:73:7e 0 0

2f:ff:00:06:2b:0d:12:99 1-2 0-1

Target: iqn.2002-10.com.brocade:21:00:00:04:cf:e7:74:cf

Number of LUN Maps: 1

FC WWN Virtual LUN(s) Physical LUN(s)

21:00:00:04:cf:e7:74:cf 0 0x0000000000000000

DISPLAYING ISCSI VT STATE AND STATUS

This section explains how to list all the iSCSI VTs on the fabric. The following information is shown

for each iSCSI VT.

• Name—IQN for the iSCSI VT

• State—Whether the FC target is online or offline

• Status—Whether the iSCSI VT has been defined (configuration completed but not committed)

or is committed (active and available to iSCSI initiators)

• Authentication method—Indicates CHAP if authentication is enabled for the iSCSI VT

To display iSCSI VTs

1. Connect and log in to the switch.

2. Enter the iscsiCfg

--show tgt command with the -v option to display the iSCSI VTs:

switch:admin> iscsicfg --show tgt -v

Number of records found: 2

Name: iqn.2006-10.com.example:disk001

State/Status: Online/Defined

Auth. Method: None

Name: iqn.2002-10.com.brocade:21:00:00:04:cf:e7:74:cf

State/Status: Online/Defined

Auth. Method: None