HP Multimedia Sound Kit (D6657A), Installation Guide

English 21
1 Installing Your Multimedia Sound Kit
Installing the Accessory Software
15 Double-click on the Multimedia folder.
16 Double-click on the Multimedia Application Install folder.
17 Insert the HP Multimedia Sound CD in the CD-ROM drive.
18 In the installation window, select the drive letter that corresponds to
the CD-ROM drive (D: or E:) and click on the Install button.
19 Select the OS/2 directory, click on Sound Galaxy, and click on the
Install button.
20 Click on the Yes button in the Change CONFIG.SYS dialog box.
21 Select 1 when the system asks you to select the total number of
Sound Galaxy sound boards.
22 Click on the OK button to accept the default settings for the sound
board. The system updates the CONFIG.SYS file. Follow the
instructions that appear on the screen.
23 Shut down and restart the PC.
CAUTION To change the sound board settings at any time, repeat this installation
procedure. Do not use Selective Install. If you change the sound board
settings using Selective Install, you may lose the sound functions. If this
happens, reinstall the sound board driver as described above.
Troubleshooting
If the error message “SYS1719” is displayed during the installation, this
indicates that the file C:\MMODEVICE (specified in the DEVICE
statement in the CONFIG.SYS file) does not contain a valid device
driver or file system driver.
If you receive this error message after removing Multimedia Software
Support from your system, it means that OS/2 did not modify your
CONFIG.SYS file correctly. You therefore need to fix this problem
before continuing with the installation. To do this:
1 Open the OS/2 System Folder.
2 Open the OS/2 System Editor.
3 Open the C:\CONFIG.SYS file under the OS/2 root directory.
d6657.book Page 21 Wednesday, February 3, 1999 5:38 PM