HP Multimedia Sound Kit (D6657A), Installation Guide

1 Installing Your Multimedia Sound Kit
Sound Board Specifications
28 English
Sound Board Specifications
Digitized Sounds
•
Sound Blaster 2.0 and Sound Blaster Pro II compatible
•
16-bit and 8-bit stereo sampling from 5 kHz to 48 kHz
•
8-bit DMA transfer on channel 0, 1 or 3
•
8-bit ADPCM decompression in hardware (2:1, 3:1, and 4:1)
•
16-bit software-based real-time audio compression/decompression
system with the following standards: CCITT A-law (16:8), CCITT
µ-law (16:8)
Music Synthesizer
•
2-operator mode generates 18 voices or 15 voices plus 5 rhythm
sounds simultaneously
•
4-operator mode generates 6 voices in 4 operator-mode plus 6 voices
in 2-operator mode; or generates 6 voices in 4-operator plus 3 voices
in 2-operator plus rhythm sounds simultaneously
•
Stereo output with 44.1 kHz sampling frequency
Mixer
•
Output mixing of all audio sources: digitized sounds, FM music,
microphone, line in, CD audio, and system sounds (PC speaker)
•
Input mixing sources: FM music, microphone, line in, CD audio
•
Multiple source recording
•
Level volume control for digitized sounds, FM music, microphone,
line in, CD audio, and master volume
Built-in Stereo Power
Amplifier
•
Two watts per channel with 4 ohms stereo output
Built-In Interfaces
•
MIDI interface for connection to external MIDI devices
❒ Sound Blaster and MPU-401 UART mode compatible
❒ Input buffer: 64-byte FIFO
•
Telephone Answering Device (TAD) interface for connection to a
voice modem board
•
AUX In interface for connection to MPEG (for audio
compression/decompression), TV tuner, or other similar auxiliary boards
d6657.book Page 28 Wednesday, February 3, 1999 5:38 PM