getting started Guide for ExecutiveAssistant

3Com ExecutiveAssistant Getting Started Guide 22
Figure 23 - Media Driver Configuration Wizard Network
27. There are two tests on the Network tab. Click the ”Connect” button to perform
the first test. The second test is performed by pressing the “Test” button. Both
tests must pass in order to continue. If the lower test indicates that 2 or more
Network adapters are installed, carefully make sure that the correct physical
adapter was selected. If it chooses the wrong one here, the system will fail and
may require that you entirely de-install and re-install the drivers to correct the
problem. If the system finds multiple Network adaptors, press “Advanced” to
ensure it selects the correct one. It is very costly to guess here – make sure you
know the right answer. If either test fails, click the "Failed Test" button for
possible solutions.
Once both tests have passed, click “Next” to continue.