getting started Guide for ExecutiveAssistant

3Com ExecutiveAssistant Getting Started Guide 50
10. Click the OK button to save these configuration changes to your NBX system. When
you save these changes, the NBX system will route internal calls to those extensions
through the new pre-translator.
Outbound External Calls
To allow ExecutiveAssistant to record outbound external calls, you must first create a
new hunt group on the NBX system for Record Outbound and then create a new dial plan
table that routes those outbound calls to the new hunt group.
1. Using NetSet, create a hunt group for the ExecutiveAssistant Record Outbound, if
you did not create one earlier. Refer to Post Media Driver Install Configuration
,
earlier in this guide. (In this example, we will use hunt group 4003.)
Note: The Record Outbound hunt group must use a different set of Media Phones
than the Auto-Attendant hunt group or ExecutiveAssistant will not function
properly.
2. In NBX NetSet, select Dial Plan > Configure. In the screen that appears, select
the Modify tab. The screen that appears shows the current dial plan in your NBX
system.