getting started Guide for ExecutiveAssistant

3Com ExecutiveAssistant Getting Started Guide 9
4. To enable Auto Disovery of Telephones during Media Driver Installation, click
on System-Wide Settings > Auto Discovery Settings within NBX NetSet and
check the Auto Discover Telephones checkbox.
Media Driver Installation
1. Read and follow each step carefully to install and configure the 3Com Media
Driver for use with the 3Com ExecutiveAssistant. Failure to do so will most
likely result in the drivers failing to install properly – if the Configuration Wizard
does not pass all required tests, the ExecutiveAssistant will not function properly.
You MUST make sure each test has passed in the media driver wizard before
moving onto the next tab.
2. Add the Media Driver license in NetSet before proceeding with the installation of
the drivers on the computer. The license is added in NetSet under Operations >
Licenses.
3. Begin the installation by double-clicking the MediaDrv.exe. The following
window (or equivalent) should appear: