NC7131 Gigabit Server Adapter User Guide First Edition (April 2001) Part Number 207746-00A Compaq Computer Corporation
Notice © 2001 Compaq Computer Corporation Compaq, the Compaq logo, and ProLiant are registered in U.S. Patent and Trademark Office. PaqFax and SoftPaq are trademarks of Compaq Information Technologies, L.P. in the United States and other countries. Microsoft, Windows, and Windows NT are trademarks of Microsoft Corporation in the United States and other countries. Intel is a trademark of Intel Corporation in the United States and other countries.
Contents About This Guide Symbols in Text........................................................................................................... v Compaq Technician Notes .......................................................................................... v Where to Go for Additional Help ............................................................................... vi Compaq Customer Support ........................................................................................
iv Compaq NC7131 Gigabit Server Adapter User Guide Appendix C Specifications NC7131 Gigabit Server Adapter Specifications...................................................... C-1 UTP Cable Specifications........................................................................................ C-2 Using UTP Category 5 Cable in Gigabit over Copper Installations................. C-2 RJ-45 Pinouts and Crossover Function....................................................................
About This Guide This user guide can be used for reference when installing a Compaq NC7131 Gigabit Server Adapter. WARNING: To reduce the risk of personal injury from electrical shock and hazardous energy levels, only authorized service technicians should attempt to repair this equipment. Improper repairs could create conditions that are hazardous.
vi Compaq NC7131 Gigabit Server Adapter User Guide WARNING: To reduce the risk of personal injury from electrical shock and hazardous energy levels, do not exceed the level of repair specified in these procedures. Because of the complexity of the individual boards and subassemblies, do not attempt to make repairs at the component level or to make modifications to any printed wiring board. Improper repairs could create conditions that are hazardous.
About This Guide Compaq Website For Compaq Web-based support services, visit http://www.compaq.com/support Navigate to a specific product and then look for support information from this list of support resources. For a complete list of available SoftPaq files, navigate to: http://www.compaq.com/support/files/allsp.html Send email to: support@compaq.com PaqFax Number The Compaq fax-on-demand retrieval system provides product-specific information.
viii Compaq NC7131 Gigabit Server Adapter User Guide North America The Compaq Customer Support department for North America can be reached at 1-800-652-6672 (1-800-OKCOMPAQ) For continuous quality improvement, calls may be monitored or recorded. Europe, the Middle East, and Africa In Europe, the Middle East, and Africa, contact your local Compaq authorized service provider.
Chapter 1 Introduction Overview The Compaq NC7131 Gigabit Server Adapter is a high-performance Ethernet adapter with a fully integrated 10/100/1000 controller that delivers up to 1000 Mb/s Ethernet over twisted-pair (copper) cabling. The Compaq NC7131 adapter has one auto-negotiating RJ-45 port and LED indicators showing link, activity, and port speed. The NC7131 Gigabit Server Adapter is a supported option for selected Compaq ProLiant™ servers.
1-2 Compaq NC7131 Gigabit Server Adapter User Guide Hardware Overview The NC7131 Server Adapter has one auto-negotiating 10/100/1000 RJ-45 port. LED indicators show link, activity, and port speed. See Table 1-1 for descriptions of LED operations. Figure 1-1.
Introduction LED Indicators The following table describes the adapter LED indicators located on the front panel of the Compaq NC7131 Server Adapter. Table 1-1 10/100/1000 LED Operations for the NC7131 Adapter LED LNK ACT 10/100/1000 Display Description On Link to the adapter is established. The adapter is receiving power and the cable connection is secure. Off There is no link to the adapter. The adapter is not receiving power, the cable connection is faulty, or the driver is not loaded.
Chapter 2 Installing the Adapter This chapter describes installation precautions and explains how to install the adapter. It also describes how to connect the network cable. WARNING: To avoid the risk of personal injury or damage to the equipment, consult the safety information and user documentation provided with your equipment before attempting the installation of the adapter. Many servers are capable of producing energy levels that are considered hazardous.
2-2 Compaq NC7131 Gigabit Server Adapter User Guide Installing the Adapter in a Server Refer to the Compaq ProLiant server documentation for additional information on how to safely install a PCI card in your server. Figure 2-1. Installing the adapter in a server 1. If the server is not PCI Hot Plug compliant, power down the server and unplug the power cord. 2. Remove the server cover and the cover bracket from a PCI slot.
Installing the Adapter Connecting the Network Cable Network connections for the NC7131 Server Adapter can employ existing UTP Category 5 (or better) cable for Gigabit over copper transmissions. For new installations, Category 5e (enhanced Category 5) or better cable is recommended. To secure the cable, plug the cable connector into the RJ-45 port. Ensure that the tab on the plug clicks into position indicating that it is properly seated. For more information, see “UTP Cable Specifications” in Appendix C.
Appendix A Regulatory Compliance Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
A-2 Compaq NC7131 Gigabit Server Adapter User Guide For questions regarding your product, contact: Compaq Computer Corporation P. O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 or call 1-800-652-6672 (1-800-OK COMPAQ). (For continuous quality improvement, calls may be recorded or monitored.) For questions regarding this FCC declaration, contact: Compaq Computer Corporation P. O. Box 692000, Mail Stop 510101 Houston, Texas 77269-2000 or call (281) 514-3333.
Regulatory Compliance Notices Taiwanese Notice Japanese Notice A-3
Appendix B Electrostatic Discharge To prevent damage to the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the device. To prevent electrostatic damage, observe the following precautions: ■ Avoid hand contact by transporting and storing products in static-safe containers.
Appendix C Specifications NC7131 Gigabit Server Adapter Specifications Table C-1 NC7131 Gigabit Server Adapter Specifications Specification Description Network Controller Chipset Intel 82543GC MAC Data Transfer Method 64-bit/66MHz PCI, compatible with 64-bit/33MHz or 32bit/33MHz Bus Master DMA Standards Supported (Varies by OS) IEEE 802.3ab, 802.3u, 802.1Q, 802.1p, 802.3ad (static configuration mode), 802.3x Dimensions 7.0 x 4.8 inches (L x W), 17.8 cm x 12.
C-2 Compaq NC7131 Gigabit Server Adapter User Guide UTP Cable Specifications To connect to the network, the NC7131 adapter uses the following cable for 1000Base-T transmission. ■ Category 5 or better UTP twisted-pair ■ 22-26 AWG, 100Ω at 1 MHz ■ EIA/TIA 568a or EIA/TIA 568b Using UTP Category 5 Cable in Gigabit over Copper Installations For Gigabit over copper installations, UTP Category 5 or better 1000Base-T cable must comply with the IEEE 802.3ab 1000Base-T standard.
Specifications Figure C-1. 10/100 straight-through wiring for RJ-45 connector 10/100 Crossover Pinouts When the crossover function is not provided within the hub or switch, you must implement the crossover through the twisted pair media using the physical pinouts indicated in Table C-3.
C-4 Compaq NC7131 Gigabit Server Adapter User Guide Figure C-2 shows the correct 10/100 wiring to use when the crossover function is implemented externally in the twisted-pair cabling. White/Orange Orange/White White/Green 1 2 3 4 5 6 7 8 Green/White Figure C-2.
Specifications Figure C-3 shows straight-through Gigabit over copper connector wiring to be used when the crossover function is implemented within the hub or switch. White/Orange Orange/White White/Green Blue/White White/Blue Green/White White/Brown Brown/White 1 2 3 4 5 6 7 8 Figure C-3.
C-6 Compaq NC7131 Gigabit Server Adapter User Guide Figure C-4 shows the correct Gigabit over copper wiring to be used when the crossover function is implemented externally in the twisted-pair cabling. 1 2 3 4 5 6 7 8 White/Orange Orange/White White/Green Blue/White White/Blue Green/White White/Brown Brown/White Figure C-4.
