Neoware Thin Client - Thintune Operating System Manual

Add/Remove Adds or removes a keyboard mapping.

5.4.1.6 Licensing tab

If you want to use your THINTUNE with terminal emulators you need to enter the according license code in

this dialog. To purchase such a license please contact your reseller.

5.4.2 Setup of a Power Term session

5.4.2.1 Network tab

Address/Port Configures the address and the port of the host. You either might enter

a hostname or an IP-address.

Connect via Lets you specify the type of connection (e.g. LAN, ISDN, etc.)

Emulation Type Offers you the emulation you want to use. THINTUNE offers you the following terminal

emulators:

VT52, VT100, VT220-7Bit, VT220-8Bit, VT320-7Bit, VT320-8Bit,

VT420-7Bit, VT420-8Bit, VT525-7Bit, VT525-8Bit, 3270 Display, 3270

Printer, 5250 Display, 5250 Printer, Tandem, HP, DG, SCO Ansi, BBS

Ansi, AT 386, AIXTERM, Wyse 60, Wyse 60, TVI 925, TVI 950.

Use hostname as Lets you determine if the hostname should be used as the

Terminal Name terminal name

Terminal Name Determines the name of the terminal

ID Determines the terminal ID which lets the host assign the Termcap

entries to the according terminal.