Neoware Thin Client - Thintune Operating System Manual

52
simulate byte Determines the size of a print-job which is sent to the print
counting server. If this option is enabled a random size is sent to the printserver. If
disabled the real size of the printjob will be send to the printserver. If the real
size of the printjob is not known the value 0 will be reported. Please be
notified that some printservers cannot handle printjobs with a value of 0
bytes.
enable spooling Enables spooling local printers
(local printers only)
Spooler retries Determines the number of retries to send data to the printer in case the
printer rejects print data.
Spooler timeout Determines how often and in which intervals the system tries to accomplish
print jobs. This is important in case print jobs were rejected from the printer
(e.g. if the paper-tray is empty).
enable custom LPR queue names enables you to use customized names for
lpr queue your print-queues
LPT queue name Name of the print-queue for the parallel port
Com1
queue name Name of the print-queue for the first serial port
Com2
queue name Name of the print-queue for the second serial port
USB1
queue name Name of the printqueue of the USB port