Neoware Thin Client - Thintune Operating System Manual

62
Frequencies ing vertical diverting frequencies following the instruction of the manufacturer.
Frequency bands can only be changed if you have chosen the monitor mark User
defined.
Vertical Sync The field Vertical Sync Frequencies
allows you to chose corresponding
Frequencies vertical diverting frequencies following the instruction of the manufacturer Frequency
bands can only be changed if you have chosen the monitor mark User defined.
) Information
As far as you chose a user defined monitor type within the text
field “Monitor Type” you can parameterize adequate horizontal
and vertical diversional frequencies under H/V Freq. These must
absolutely correspond to your monitor type, because otherwise
damage of the device is possible.
Test Display Settings This button allows you to test, if the monitor you use is compatible with the display
parameters defined.
) Information
The button „Test display settings“ allows you to test monitor
parameters defined. To prevent contradictions between the
monitor you use with parameters chosen, we urgently recommend
to make use of this function.
) Information
Should you not have tested your monitor parameters and should
your monitor therefore not be able to display your THINTUNE
session, please start your device anew and push the key „F“ as
soon as you are asked to do so during booting. F calls up the Fail-
Safe Configuration and lets you correct your monitor parameters.
Use dual head With a dual monitor solution available in the terminal this switch toggles the second
monitor on or off