Neoware Thin Client - Thintune Operating System Manual

75
7.7.1 LPT1 tab
Enable lpt1 portmapping Enables parallel portmapping
TCP Port Determines the TCP port for the parallel port
Idle Timeout In case of inactivity this lets you determine the timeout after
which the port will be shut down.
7.7.2 COM1/COM2 tab
) Information
General settings have effects to all appTHINTUNEtions that take
use of the serial ports. There are no effects to COM-port mapping
offered by Citrix.
) Information
Please be notified that simultaneous portmapping of Citrix and
THINTUNE will not work
Speed Determines the speed of the serial port
Uart Type Determines the type of the serial port
Parity Determines the parity of the serial port
Stopbits Determines the amount of stop-bits to be used
Data Bits Determines the amount of data-bits to be used
Flow Control Determines the type of flow-control for the serial port. You
might select RTS/CTS, XON/XOFF or None
Enable Portmapping Enables portmapping for the according serial device
TCP Port Determines the TPC port for the parallel port