Neoware Thin Clients - Thintune Manager Manual

If there are multiple THINTUNE Management Server available in your network (e.g. for different subnets) you
now might enter the remaining servers into the Management GUI.
If THINTUNE Manager is restarted all servers which you entered will remain available. There is no need to
reenter them. However, to receive a list of Thin Clients which are available in your network you again need to
connect your Management Console to the Management Server (right mouse-click and then select the
“Connect“-option).
1.3.2 Available Client Information
Online Indicates if a client is powered on or off.
Configuration Displays in which group the client is included. If a terminal is marked as “individual“
this means that the device has not been assigned a dedicated group configuration.
Host-Name Displays the name of a terminal.
MAC-Address Displays the MAC-address of a terminal.
Serial Number Displays the serial number of a terminal.
) Note
This option is available only for THINTUNE Thin Clients which were
shipped since Q2/2002.
Model Displays the hardware-revesion of a terminal.
IP-Address IP-address of a unit.
IP-Configuration Indicates if the terminal is assigned a static IP address or a dynamic IP-address (DHCP)
Firmware Displays the firmware version which is installed in the terminal.
Page 7