HP NetRAID Installation and Configuration Guide

1 Introduction

HP NetRAID Series Adapters

The HP NetRAID-3Si (D5955A) and HP NetRAID-1Si (D2140A), adapters

provide an interface between the host system and a disk array storage system.

The adapters use the PCI (Peripheral Component Interconnect) standard to

control data transfers on one to three SCSI channels.

The HP NetRAID Series adapters support the operating systems listed below, for

which drivers are provided. Refer to your HP NetServer documentation for the

operating systems supported on your server.

Network Operating System HP NetRAID-3Si HP NetRAID-1Si

Microsoft Windows 2000

yes yes

Microsoft Windows NT

3.51 yes yes

Microsoft Windows NT

4.0, 4.0 for Small

Business, 4.0 Enterprise, 4.0 Enterprise with

MSCS, 4.0 Terminal Server

yes yes

Novell NetWare

3.2 no no

Novell NetWare

4.2, 4.2 SMP, SMB 4.2 yes yes

Novell NetWare

SFTIII 4.2 yes yes

Novell NetWare 5 yes yes

SCO

Open Server 3.0 no no

SCO Open Server 5.0.4 UP and SMP yes yes

SCO Open Server 5.0.5 UP and SMP yes yes

SCO UnixWare

2.1.x no no

SCO UnixWare 7.0.x yes yes

SCO UnixWare 7.1 yes yes

Linux

5.2, 6.0, 6.1 yes no

IBM OS/2

Warp Server SMP 4.0 yes yes

IBM OS/2

E-Business yes yes