HP NetRAID Installation and Configuration Guide

Chapter 7 Preparing for Online Capacity Expansion
105
7. From the Logical Drive menu for the drive you want to prepare, choose
Properties.
8. Choose Virtual Sizing.
9. On the Virtual Size menu, choose Disable, and confirm your choice.
10. Press Esc twice to return to the Logical Drive menu.
If you need to enable virtual sizing on another logical drive, choose the
logical drive and repeat steps 6 through 10.
11. If there is more than one HP NetRAID Series adapter installed (including
any integrated HP NetRAID controller), press Esc to return to the Objects
menu. Enable virtual sizing on the logical drives of all adapters as
necessary.
12. To exit, press Esc until you see the Exit? box, and choose Yes.