HP NetRAID Installation and Configuration Guide

Chapter 9 Managing Servers Over the Network
114
NOTE Microsoft Windows NT Terminal Server Edition is not
supported in either client or server for managing
HP NetRAID-1Si and HP NetRAID-3Si over the network.
The sections that follow identify the NOS requirements for different clients and
servers on the network.
Requirements for Clients That Manage HP NetRAID over the Network
• Microsoft Windows NT, Windows 2000, or Windows 95/98 must be
installed.
• If the client will manage NetWare servers, you must install "Client
Service for NetWare," which is part of Windows NT, Windows 2000, and
Windows 95/98. You can find this in the Control Panel, Network Icon.
Refer to Windows documentation for more information.
• Optionally, the client can be your HP NetRAID Registration Server as
described later in this chapter.
Requirements for Servers That Manage HP NetRAID over the Network
• Microsoft Windows NT or Windows 2000 must be installed.
• If the server will manage NetWare servers, you must install "GateWay
Service for NetWare," which is part of Windows NT, Windows 2000, and
Windows 95/98. You can find this in the Control Panel, Network Icon.
Refer to Windows documentation for more information.
• Optionally, this server can be your HP NetRAID Registration Server as
described later in this chapter.
Requirements for Servers on the Network That Do
Not Manage HP NetRAID
• Microsoft Windows NT, Windows 2000, or Novell NetWare must be
installed.
• A server running either Microsoft Windows NT, Windows 2000, or
Novell NetWare can be your HP NetRAID Registration Server.
Other Requirements
Before installing the software for HP NetRAID management, ensure that the
network is operating and that all of the following have been done: