HP NetRAID Installation and Configuration Guide

Chapter 9 Managing Servers Over the Network

126

Configuration

Adapter

Physical

Drive Menu

Logical

Drive Menu

Progress

Help

Toggle to switch

between views

Server

Selector

Physical

Drives

Adaptor Selector

Figure 9-1. HP NetRAID Assistant Window

If HP NetRAID Assistant is started on a client or server that can access

integrated HP NetRAID controllers or HP NetRAID Series adapters over the

network, you must select the server you want to access. The HP NetRAID

Assistant Main window has a Server pull-down list next to the Adapter pull-

down list.

When you select a server from the server selector box on HP NetRAID Assistant,

a window appears with the choice of access modes: Full Access and View Only.

Select one.

• Full Access mode requires that authorized users enter a password. The

password is case-sensitive. The password must be given before full access

can be established to a server, and each server can require a unique

password. Full Access mode activates features that let you change the

HP NetRAID configuration and the states of physical and logical drives.

For example, in Full Access mode, you can initiate recovery from a disk

failure, or make a new hot spare.