HP NetRAID Installation and Configuration Guide

Chapter 10 Understanding HP NetRAID Utilities
134
HP NetRAID Express Tools
HP NetRAID Express Tools is a text-based configuration utility that is contained
in the adapter firmware and available to all network operating systems.
HP NetRAID Express Tools contains some advanced management and diagnostic
features that are not available with HP NetRAID Assistant or HP NetRAID
Config.
To start HP NetRAID Express Tools:
1. Log off all users, close all applications, and power down the
HP NetServer.
2. Reboot the HP NetServer.
3. When the following prompt appears, press <Ctrl> <M>.
Option: Experienced users may press <Ctrl> <M> for
HP NetRAID Express Tools now.
Firmware Initializing
NOTE For internal mass storage in some HP NetServers, SCSI ID 5
is reserved for the SAF-TE processor that manages the
hot-swap mass storage cage.
For external mass storage, a SCSI ID may be reserved for a
SAF-TE processor. The number of the reserved SCSI ID
varies with the type of external enclosure.
The SAF-TE processor is displayed as PROC.
For a list of functions performed by HP NetRAID Express Tools, see the menu
chart that follows.
For complete instructions on using HP NetRAID Express Tools, see the
HP NetRAID Series User Guide.