HP NetRAID Installation and Configuration Guide

Chapter 10 Understanding HP NetRAID Utilities
136
HP NetRAID Monitor Utilities
The HP NetRAID monitor utilities provide information about the status of
HP NetRAID drives and adapters. A complete list of monitor alert messages is
available in the HP NetRAID Series User Guide.
The HP NetRAID monitor utilities start automatically every time you restart the
HP NetServer for all NOSs except Novell NetWare and IBM OS/2.
To start the monitor utility for Novell NetWare:
•
Type load <d2>:\nwserver\megamon.nlm and press Enter every
time you reboot the NetServer.
or
•
Add the megamon.nlm file to your autoexec.ncf file to have the
monitor utility start automatically each time you reboot.
To start the monitor utility for IBM OS/2:
•
Type monitor.cmd from the HP NetRAID directory every time you
reboot the NetServer.
or
•
Add the monitor.cmd file to your startup.cmd file to have the
monitor utility start automatically each time you reboot.