HP NetRAID Installation and Configuration Guide

Chapter 1 Introduction
7
settings. (Adapter settings include such parameters as the Rebuild Rate, Power
Fail Safeguard, and Autorebuild.)
NOTE The HP NetRAID Config and HP NetRAID Express Tools
utilities save logical drive settings only and do not save
adapter settings.
Support for Clustering
The HP NetRAID Series adapters can be used with HP NetServer clusters.
HP NetServer clusters provide reliable, increased-availability solutions for
applications where unplanned downtime is unacceptable. For complete
information on clustering, visit the HP NetServer Clustering Solutions web site at
http://www.hp.com/go/netserver/products/
I
2
O Support
HP NetRAID-3Si and HP NetRAID-1Si adapters support I
2
O (Intelligent
Input/Output) with some operating systems.
Physical Disk Roaming and Data Migration
HP NetRAID Series adapters allow physical disk roaming, in which the adapter
keeps track of disk modules if they are moved to different slots in the hot-swap
cages, as long as the slots are all controlled by the same adapter.
HP NetRAID Series adapters allow disk modules to be moved to different
HP NetRAID Series adapters. HP NetRAID Series adapters can be swapped
without losing data readability.