Manualshelf

HP NetRAID Installation and Configuration Guide

ManualsBrandsHP ManualsComputer AccessoriesHP NetRAID 1Si Controller
51525354555657585960
Chapter 5 Installation and Configuration
46
If the Adapter is Too Long
Some HP NetServers, such as the HP NetServer LXr Pro8, do not have space for
a full-length PCI board. If the adapter is too long, remove the board extender
(plastic "handle") from the HP NetRAID-3Si adapter before you install the
adapter, as shown in Figure 5-1.
Remove the board extender now, before you connect the Battery Backup Unit.
Save the board extender for future use if you move the adapter to another system.
Figure 5-1. Remove Board Extender Before Installing the Adapter in
HP NetServer LXr Pro Systems