HP NetRAID Installation and Configuration Guide

Chapter 5 Installation and Configuration
55
NOTE Since HP NetRAID-1Si is a single-channel adapter, the
HP NetRAID Assistant window for this adapter contains only
Channel 0 information. Channel 1 and Channel 2 columns do
not exist.
Steps H and I only describe the features of the HP NetRAID Assistant needed to
configure the adapter initially. Refer to the HP NetRAID Series User Guide in
Information Assistant for more information about HP NetRAID Assistant.
The HP NetRAID Assistant window contains the following features from top to
bottom:
• Menu bar: The menu bar activates pull-down menus for Configuration,
Adapter, Physical Drives, Logical Drives, Progress, and Help.
• Toolbar: The toolbar icons are separated into four categories of functions:
Configuration, Properties, Miscellaneous, and Other. They provide
shortcuts to access the menu options.
Figure 5-4. HP NetRAID Assistant Main Menu Toolbar Options
• Adapter box: The Adapter box shows the number of the current adapter
that is being configured. If the HP NetServer contains more than one
adapter, you can change the current adapter by using the Adapter box
pull-down list.