HP NetRAID Installation and Configuration Guide

Chapter 6 HP NetRAID Software
74
◊ To change the PCI class code, either see Step M in this chapter, or use
the Set Class utility " HP NetRAID Software for DOS" diskette in the
diskette library on the HP NetServer Navigator CD-ROM.
Data written or read during I
2
O operation is fully compatible with data written or
read during non-I
2
O operation.
Step J. Use HP NetServer Navigator CD-ROM to
Prepare Diskettes
In this step, you will use the HP NetServer Navigator CD-ROM to create the
diskettes you need to install the HP NetRAID drivers and the HP NetRAID
configuration utility specific to your NOS. The diskettes that you need to create
may depend upon whether you plan to use Installation Assistant’s automatic
mode of NOS installation, or whether you plan to install the NOS manually.
Follow the instructions in this step to do the following:
• Verify that you have the most recent version of the HP NetServer
Navigator CD-ROM, if you have not already done so.
• For either automatic or manual installation of Windows 2000, view the
NOS installation instructions for Windows 2000.
◊ If there are no special instructions for installing Windows 2000,
create diskette(s) containing the NOS-specific configuration utility.
◊ If there are special instructions, create the following:
∗ Diskette(s) containing the instructions for installing the NOS and
anything else required in those instructions.
∗ Diskette(s) containing the NOS-specific configuration utility
• For automatic installation of Windows NT or NetWare not supporting
I
2
O, create the following:
◊ Diskette or printed copy of instructions for installing the NOS
◊ Diskette(s) containing the NOS-specific configuration utility
• For manual installation of Windows NT or NetWare not supporting
I
2
O, create the following:
◊ Diskette(s) containing the HP NetRAID drivers and instructions for
installing the NOS