HP NetRAID Installation and Configuration Guide

Chapter 6 HP NetRAID Software

Make NOS-specific Configuration Utility Diskette

If you plan to install Windows NT, Windows 2000, or Novell NetWare, you must

make another diskette containing the NOS-specific configuration utility.

NOTE You can skip this step if you plan to install IBM OS/2,

SCO UnixWare, or SCO OpenServer. The NOS-specific

configuration utility was already copied to the drivers

diskette(s). Go to "Print NOS Installation Instructions" later in

this chapter.

You can use the HP NetServer Navigator CD-ROM to create the diskette(s)

containing the NOS-specific configuration utility in either of two ways:

• On a separate PC workstation running Windows 95, 98, NT, or 2000

and having a CD-ROM drive and mouse: Refer to "Using a Separate

Workstation to Create NOS-specific Configuration Utility Diskette " later

in this chapter.

• On the HP NetServer you are configuring: Refer to "Using the

HP NetServer to Create NOS-Specific Configuration Utility Diskette" later

in this chapter.

Using a Separate Workstation to Create NOS-specific Configuration Utility Diskette

1. If you created the NOS drivers diskette(s) on the PC workstation, the

Diskette Library screen is displayed. If you need to display the Diskette

Library, refer to "Using a Separate Workstation to Create Drivers

Diskette" earlier in this chapter.

2. On the Diskette Library screen, double-click one of the following:

◊ For Windows NT or Windows 2000, select HP NetRAID Software

for Windows. Previously, this diskette was named " HP NetRAID

Assistant for WinNT and Win95/98."

◊ For NetWare, select HP NetRAID Software for NetWare.

Follow the onscreen instructions to create the diskette(s).

3. To exit HP NetServer Navigator, click the Exit icon in the lower left

corner of the screen.

4. Remove the HP NetServer Navigator CD-ROM from the drive.

5. Go to "Print NOS Installation Instructions" later in this chapter.