HP NetRAID-2M Controller Product Brief (12/17/02)

specifications
Supported RAID levels 0, 1, 5, 10, and 50
SCSI connectors
two 68-pin high-density internal connectors; two 68-pin,
very-high-density external connectors
SCSI channels 2
Devices per SCSI channel Up to 14
SCSI device types supported Synchronous or asynchronous
SCSI bus Single-ended or LVD (low voltage differential)
SCSI data transfer rate Fast, Ultra, Ultra2, Ultra3
SCSI termination SCSI active termination
Termination disable Through jumper configuration
Card size 6.875" x 4.2" (half-length PCI)
Multiple cards Up to 6 HP NetRAID family adapters (varies by server)
Bus type PCI 2.1 (64-bit bus) 66 MHz
Bus data transfer rate Up to 512 MB/sec
Processor Intel i960RN @ 100 MHz
Cache configuration 64 MB or 128 MB SDRAM
Nonvolatile RAM 32K x 8 for storing RAID configuration
BIOS HP NetRAID BIOS
Tone generator
Audible warnings indicate degraded drives, offline drives,
and drive rebuilds
Battery backup Standard
Warranty
1-year return to HP or system matching when installed
in an HP Netserver
supported operatin
g
systems
Microsoft
®
Windows NT
®
4.0 and Windows
®
2000; Novell NetWare 5.1 and 6.0; SCO
OpenServer 5.x; SCO UnixWare 7.x; and Red Hat Linux 7.0*.
* Only available on HP Server LP1000r and HP Server LP2000r
supported servers
E60, E800, tc3100, tc4100, LC 3, LC2000, LH3, LH3000, LH 4, LH6000,
LPr, LP1000r, LP2000r, LT6000r, LXr8000, and LXr8500