2002

tc4100nt2m

Shared Storage Configuration

Parameter Specification

Channels 0, 1

RAID levels 1, 5, 10, 50

Logical disks One per RAID array

Eight, maximum, per cluster

Configuration options Cluster mode on

Cache write policy to Write thru

Enclosure

Disk drives Any HP drive supported by storage enclosure. Any combination of HP disk

models is allowed in an array, on a SCSI channel, or in a cluster.

Number of cabinets One or two per NetRAID-2M controller (up to four per cluster)

Model Rack Storage/12 D5989C, containing two D6025C SCSI controller cards

Status SCSI ID 5 (fixed)

Disk SCSI IDs 0–3, 8–15 (fixed)

Cables

SCSI Any two HP LVD SCSI offset cables per RS/12 from the following list:

1 meter D7131A

2.5 meter D6020A

5 meter D6982A

10 meter D6983A

See SCSI cabling diagram on page 5.

Power distribution

Layout Redundant power distribution units (PDUs) are recommended. See power

cabling diagram on page 6.

Intra-Cluster (Heartbeat) LAN Configuration

Parameter Specification

Network

Connection HP D5954A crossover cable, or equivalent.

The intra-cluster LAN may only be used for cluster node communication. It may

not be used for client communication.

NIC

Quantity One

Model Integrated NIC, HP 10/100 IPSec 3DES, Model P3492A, or any LAN adapter

that is on both the HP Tested Products List and the Microsoft

Hardware

Compatibility List

Driver For integrated NIC or P3492A, latest version from Navigator CD-ROM or HP

technical support web site.

For other NICs, any vendor-supported driver.

4/1/02 3