hp tc4100 netraid-2m config guide for Microsoft NT 4.0 Clusters PDF, 395K, 4/1/2002

tc4100nt2m
3. Another NetRAID Adapter may be
installed in each server for local
storage (and must connect only to
local storage).
4. This diagram shows use of two
NetRAID-2M controllers, the maximum
supported for shared storage,
installed in slots 1 and 2. One or two
NetRAID-2M cards may be used, and
one to four RS/12s are supported.
A maximum of eight logical drives are
supported for the cluster.
0
1
NetRAID-2M Controllers
NOTES:
2. Cables between the servers and
shared storage cabinets can be any
HP LVD SCSI cable up to 10
meters. See “ in the Shared
Storage Configuration table in the guide
for a list of cables that can be used.
Cables”
HP tc4100 Cluster with HP Rack Storage/12
4/1/02 5