HP NetRAID-4M and RS/12 Cluster Install Guide for Windows 2000 Advanced Server Clusters

HP NetRAID-4M Cluster Services Installation Guide Cluster Software Components and Quorum

11. To create a mirrored set for the quorum drive, from the Type to create pulldown menu

select Mirror set (RAID 1).

To create a RAID-5 set for the quorum drive, from the Type to create pulldown menu

select RAID-5 set.

NOTE Other fault tolerant RAID types are supported. The Mirror set and RAID-5 set are

two examples. Please refer to the HP NetServer Cluster Configuration Guide for a

complete listing of supported configurations.

13. Click the Force in Dest check boxes.

NOTE All of the originally selected non-member disks are considered for inclusion in the

destination container; but, only those disks with an X in the right-hand In Dest

column are actually included in the destination container. Disks whose Force in

Dest check boxes are checked are forced to be included in the container.

Force in Dest is particularly useful when reconfiguring containers when, for

example, a rebuild to a hot spare has occurred and the administrator wishes to

move the array back to the original drive positions after the bad drive has been

replaced.

Force channel optimization when checked, attempts to place disks in the

container on alternating physical SCSI channels, to maximize performance.

14. In the Size options area, select Use all of … and then click Create, then OK.

15. Read the Write Cache message:

This container’s write cache will be set to “Enable when protected”. However, because the

container resides on a clustered controller’s shared channel the write cache will not be

enabled.

Click OK.