HP NetRAID-4M Configuration and Upgrade Guide (Release 5)

19
Chapter 5 HP Server BIOS and Slotting Rules
9. Use Slots 7-10 because they are 64 bit slots. Slots 1-6 are 32 bit slots, and 1-2
are typically used for the NIC and RMC.
10. Use Slots 3-10 because 1-2 are typically used for the NIC and RMC.
11. Use Slots 1-2 because they are 64 bit slots. Slots 1-6 are 32 bit slots.
12. The Remote Management Card for this server only works in this slot. If you plan
to install a Remote Management Card in the future, do not use this slot for a
NetRAID-4M controller.
NOTE The maximum number of HP NetRAID-4M cards is four
while using NetWare 5.X and 6X.
NOTE NetWare 4.2 is not supported on the LXr 8500.