HP NetRAID-4M Configuration and Upgrade Guide (Release 5)

The issues and problem resolutions identified and resolved that affected all operating

system platforms are listed below by operation environment, and then explained by

issue.

To find additional information about NetRAID-4M see HP’s web site at:

http://netserver.hp.com/

9 Issues and Problem Resolution

Table 9-1. Issues and Problems Mapped to Operating Environments

ISSUES

Mapping of Issues to Operating Environments:

F= new feature

R = resolved

W = workaround

 = not applicable

Windows NT4

Windows 2000

Novell NetWare

OpenServer

UnixWare

Linux

1: Automatic Failover rebuilds onto failed drive RRRRRR

2: Problem creating containers >1 TB in size RRRRRR

3: SCSI bus reset hanging controller RRRRRR

4: Data corruption under dual synthetic test loads RRRRRR

5: FAST identify does not turn off the blinking drive

location LED

RRRRRR

6: 4M option ROM does not call Post Memory Manager

when CTRL + A is invoked

RRRRRR

7: DOS driver cannot handle inquiry command when the

specified Host Adapter number does not exist

RRRRRR

8: Retry interval on broadcasting a SMART event set to

500min!

RRRRRR

9: Multiple drive failures RRRRRR

10: Regression: NetWare fails unload certification test





11: Problem with double SCSI bus reset RRRRRR

12: OS-Managed container cannot be deleted RR



13: RAID-5 or RAID-50 hang RRRRRR

14: 1 TB expansion RRRRRR

15: More than 2 GB of RAM with NetWare 6



