HP NetRAID-4M Configuration and Upgrade Guide (Release 5)

Chapter 9 Issues and Problem Resolution
38
1 Automatic Failover rebuilds onto failed drive
54: Upgrading Windows 2000 NetRAID-4M driver

W

55: Free space and file system extension WW

56: Move group function does not move the resource first
time

W

57: System will not boot until RAID-5 finishes clear

W

58: NetWare 5.1 will not boot the driver with 4 GB of
memory

R

59: Novell NetWare event handling of drive pulls with no
I/O

W

60: Novell NetWare 4.2 installation causing red pop-up

W

61: Novell NetWare 5.1 NSS free space and file system
extension

W

62: NetWare splitting mirrors

W

63: NetWare SCSI agents for LP 2000r will hang with
NetRAID-4M FAST

W

64: UnixWare unable to access files under very heavy load

R

65: UnixWare no longer boots reliably on machines with
four CPUs

W

66: Cannot distinguish PCI subsystem vendor ID

W

67: Error messages when using DISKADD

W

68: FSCK failure

W

69: UnixWare installation issues

W

70: OpenServer 5.0.x reports “Spurious Interrupt”

W

71: Adding disks under SCO OpenServer 5.0.X

W

Table 9-1. Issues and Problems Mapped to Operating Environments
ISSUES
Mapping of Issues to Operating Environments:
F= new feature
R = resolved
W = workaround
 = not applicable
Windows NT4 Windows 2000 Novell NetWare OpenServer UnixWare Linux