READ THIS FIRST: HP NetRAID-4M Release 4 Software Update Sheet

2 of 2 HP Part Number 5990-4552

4. Install the Release 4 NetRAID-4M driver and utility - Complete the NetRAID-4M installation by installing

the Release 4 driver and utility using the steps from Chapters 3 –7 of the HP NetRAID-4M Installation Guide.

Note Do not install the NetRAID-4M software from the HP NetServer Navigator CD as instructed by

the HP NetRAID-4M Installation Guide. The HP NetRAID Software Library CD that is included

with the accessory kit and the HP website are the only sources for obtaining the Release 4 software.

Substitute use of one of these two sources in place of the HP NetServer Navigator CD in the

installation procedures.

Additional Documentation

HP NetRAID-4M Configuration and Upgrade Guide (Release 4)

For further details regarding the NetRAID-4M Release 4 software please see the HP NetRAID-4M Configuration and

Upgrade Guide (Release 4) which is available for download from the HP website and is included with the NetRAID-

4M accessory kit:

 Directions on how to determine which versions of NetRAID-4M software are currently installed.

 Tables showing the Release 4 versions of the NetRAID-4M software components by operating system.

 Directions on how to update the NetRAID-4M to Release 4 software if older NetRAID-4M software is

installed

 Tables showing which system BIOS, HDD firmware, and RS/12 firmware versions should be installed for

proper operation of a NetRAID-4M controlled mass storage susbsystem and directions on how to upgrade if

needed.

 An “Issues and Problem Resolution” list that includes:

 Issues that have been resolved in the Release 4 software

 Issues that still exist, with workarounds provided

 Issues that have been noted and are under investigation