HP NetRAID-4M Configuration and Upgrade Guide (Release 5)

Chapter 4 NetRAID-4M Software

Step 3-Remove the HP NetRAID-4M FAST and/or CLI utilities.

Windows NT and Windows 2000

1. At the main Windows desktop, press Start > Settings > Control Panel.

2. Select Add / Remove Programs.

3. Select NetRAID-4M and press the Remove/Change button to delete the old

FAST Utility program.

4. Do not reboot the server when prompted.

NetWare, Linux, UnixWare, OpenServer

For instructions on updating the HP NetRAID-4M driver for operating systems other

than Windows NT and Windows 2000, please see that operating system's

documentation.

Step 4-Update the HP NetRAID-4M driver

Windows 2000

1. At the Windows 2000 desktop right click on My Computer and select Manage.

2. Select Device Manager.

3. Select SCSI and RAID Controllers.

4. Right click on the HP NetRAID-4M Controller to bring up the Properties

window.

5. Select the Driver tab.

6. Select the Update Drivers button.

NOTE During the operation of removing or installing the HP

NetRAID-4M Utility from Windows NT and Windows 2000

both the FAST utility and the CLI utility will be removed or

installed.