HP NetRAID-4M Configuration and Upgrade Guide (Release 5)

29
HP Netserver LC 2000: Installing the New SCSI
Cable
Connecting Common Tray Devices
Connect the new SCSI cable (5185-2359) to the devices in the Common Tray as
shown in Figure 8-1:
Figure 8-1. HP Netserver LC 2000 Common Tray Cabling*
*The slot location shown in Figure 8-1 is for illustration only. Other slot locations
will work. (For maximum performance, install your HP NetRAID-4M in a 64-bit
slot.)
1. Remove the Netserver from the rack enclosure. (Refer to the HP Netserver LC
2000/2000r Installation Guide.)
8 Internal Cabling