HP NetRAID-4M Configuration and Upgrade Guide (Release 5)

Chapter 9 Issues and Problem Resolution
74
When you are ready to set up your disks under OpenServer, do not use mkdev hd.
You must first use fdisk -f and then divvy -m to configure your 4M disks. For
example,
fdisk -f /dev/rdsk/c0t0d0
Use the CLI utility to open the 4M controller and find the device names such as
c0t0d0 for each created container. For example, to launch the CLI and list all the
containers:
/usr/sbin/./hpncli
open hpn0
container list