Integrated HP NetRAID Controller Config. Guide

Chapter Introduction
2
Table 1-1. SCSI Channel Configurations
HP NetServer
LH 3/3r and
LH 4/4r
HP NetServer
LH 3000/3000r and
LH 6000/6000r
HP NetServer
LT 6000r
Mass Storage
Channels
SCSI A and SCSI B
SCSI B also
includes SE SCSI
channel
SCSI A can have
one internal or one
external connection
SCSI B can have
one internal or one
external connection
SCSI A and SCSI B
Additional
independent SE SCSI
channel
SCSI A can have one
internal or one
external connection
SCSI B can have one
internal or one
external connection
SCSI A and SCSI B
No SE SCSI channel
SCSI A connected to
internal hot-swap
mass storage cage
SCSI B can have one
external connection
Configuring
Integrated
HP NetRAID
SCSI A and SCSI B
can be configured
independently as
HP NetRAID or
non-RAID SCSI
SCSI A and SCSI B
must be configured
the same way, both
as HP NetRAID, or
both as non-RAID
LVD SCSI
No integrated
HP NetRAID on
SE SCSI
SCSI A and SCSI B
must be configured
the same way, both as
HP NetRAID, or both
as non-RAID LVD
SCSI
Default
Configuration
SCSI A in
HP NetRAID mode
SCSI B in SCSI
mode
SCSI A and SCSI B both in HP NetRAID
mode