Integrated HP NetRAID Controller Config. Guide

Chapter 8 Managing Servers over the Network
119
2. HP NetRAID Registration Server: Start it before the others by double-
clicking on its Windows icon or by loading NetWare module
reg_serv.nlm.
3. HP NetRAID Access Service: Start it by double-clicking on its Windows
icon or by loading NetWare module raidserv.nlm.
NOTE To change the password for a server using Windows NT or
Windows 2000, run setpass.exe under
\netraid\dll\.
To change the password for a server using NetWare, reinstall
the HP NetRAID management software, as described in this
chapter, with the new password.
Start HP NetRAID Assistant
Run HP NetRAID Assistant from a client or server in which the HP NetRAID
Assistant utility was installed by clicking on the NetRAID Assistant icon in the
NetRAID program group (or group you specified).
If HP NetRAID Assistant is started on a standalone server, the main window
(shown in Figure 8-1) is displayed immediately.