Integrated HP NetRAID Controller Config. Guide

Chapter 10 Understanding HP NetRAID Utilities
136
HP NetRAID Express Tools
HP NetRAID Express Tools is a text-based configuration utility that is contained
in the controller firmware and available to all network operating systems.
HP NetRAID Express Tools contains some advanced management and diagnostic
features that are not available with HP NetRAID Assistant or HP NetRAID
Config.
To start HP NetRAID Express Tools:
1. Log off all users, close all applications, and power down the
HP NetServer.
2. Restart the HP NetServer.
3. When the following prompt appears, press <Ctrl> <M>:
Option: Experienced users may press <Ctrl> <M> for
HP NetRAID Express Tools now.
Firmware Initializing
NOTE For internal mass storage in HP NetServer LH 3000/3000r,
LH 6000/6000r, and LT 6000r, SCSI ID 5 is reserved for the
SAF-TE processor that manages the hot-swap mass storage
cage.
For an external mass storage enclosure with a SAF-TE
processor, a SCSI ID is reserved for that processor. The
number of the reserved SCSI ID varies with the type of
external enclosure.
The SAF-TE processor is displayed as PROC.
For a list of functions performed by HP NetRAID Express Tools, see the menu
chart that follows.
For instructions on using HP NetRAID Express Tools, see the HP NetRAID
Series User Guide.