Integrated HP NetRAID Controller Config. Guide

155
B Worksheets
Configuration Worksheets
Figures B-1 and B-2 are worksheets for you to record your configuration choices
for the hardware and logical drives. We recommend that you log your
configuration selections on photocopies of these worksheets.
NOTE SCSI ID 7 is reserved for the integrated HP NetRAID
controller.
For internal mass storage in HP NetServer LH 3000/3000r,
LH 6000/6000r, and LT 6000r, SCSI ID 5 is reserved for the
SAF-TE processor that manages the hot-swap mass storage
cage.
For an external mass storage enclosure with a SAF-TE
processor, a SCSI ID is reserved for that processor. The
number of the reserved SCSI ID varies with the type of
external enclosure.
Figures B-3 and B-4 are samples of Worksheets A and B for an HP NetRAID
adapter with ten physical drives, three arrays, and three logical drives. It has a
50% rebuild rate.