Integrated HP NetRAID Controller Config. Guide

Index
173
Scatter/gather, 5
SCSI A, 31, 32
SCSI B, 31, 32
SCSI channels, 1
adding a second channel, 123
HP NetRAID, 166
HP NetServer LH 3/3r and LH 4/4r,
31, 33
HP NetServer LH 3000/3000r and
LH 6000/6000r, 32, 33
HP NetServer LT 6000r, 32, 33
physical drives on, 57
planning, 29
SCSI disk status, 166
SCSI ID
in HP NetRAID, 166
of physical drive, 57
SCSI SE, 32
SCSI transfer rate, 35, 84
Set PCI class code, 73, 84, 86
Setup utility, 47, 48, 53
exiting, 54
starting, 51
Span Arrays check box, 64
Spare (hot spare) state of physical
drive, 58
Specifications, 151, 152, 153
Starting
HP NetRAID Access Service, 119
HP NetRAID Assistant, 119, 131
HP NetRAID Config, 134
HP NetRAID Express Tools, 84
HP NetServer Navigator, 55
Setup utiltiy, 51
States of physical drives, 58
Step A. Plan Your Hardware, 27
Step B. Plan Arrays and Logical
Drives, 35
Step C. Verify Hardware Setup, 47
Step D. Run Setup Utility, 47
Step E. Start HP NetServer Navigator
to Launch HP NetRAID Assistant,
55
Step F. Configure Arrays and Logical
Drives, 55
Step G. Save Configuration and
Initialize, 69
Step H. Decide I
2
O or Non-I
2
O, 73
Step I. Use the HP NetServer Navigator
CD-ROM to Prepare Diskettes, 74
Step J. Install NOS and HP NetRAID
Drivers, 79
Step K. Install NOS-specific
Configuration Utility, 81
Step L. Run Run HP NetRAID Express
Tools, 83
Step M. Prepare for Online Capacity
Expansion, 87
Stripe size (depth)
HP NetRAID, 166
planning, 43
setting, 65
Stripe width, 167
Striping, 166
T
Tagged command queuing, 5
Tape drives, 34
Toolbar options, 57
U
Undo button, 66
Undoing
hot spares, 64
logical drives, 66, 68
physical drives, 68
UnixWare, 75, 80, 81, 87, 131, 134
configuration utility installation, 83
Utilities
configuration, 71
HP NetRAID Assistant, 56, 81, 131
HP NetRAID Config, 81, 83