Integrated HP NetRAID Controller Config. Guide

Chapter 5 Configuration
56
HP NetRAID Assistant
Figure 5-1. HP NetRAID Assistant
Figure 5-1 shows a typical configuration of HP NetServer LH 3/3r or LH 4/4r
where SCSI A is included in the HP NetRAID subsystem and SCSI B is
excluded. If you include both SCSI A and SCSI B, you see two channel columns
of physical devices.
NOTE For HP NetServer LH 3000/3000r, LH 6000/6000r, and LT
6000r, HP NetRAID Assistant always displays two channel
columns.
The HP NetRAID Assistant, shown in Figure 5-1, is an object-oriented graphical
user interface (GUI) with conventions similar to those in Microsoft Windows.
Click on an object with the left mouse button to select or deselect it. Chapter 10
of this guide lists all the menus that are available by clicking on menu bar items.
Step F (this step) and Step G describe the features of the HP NetRAID Assistant
needed to configure the adapter initially. Refer to the HP NetRAID Series User
Guide in Information Assistant for more information about HP NetRAID
Assistant.