Integrated HP NetRAID Controller Config. Guide

Chapter 5 Configuration
57
The HP NetRAID Assistant window contains the following features from top to
bottom:
• Menu bar: The menu bar activates pull-down menus for Configuration,
Adapter, Physical Drives, Logical Drives, Progress, and Help.
• Toolbar: The toolbar icons are separated into four categories of functions:
Configuration, Properties, Miscellaneous, and Other. They provide
shortcuts to access the menu options.
Figure 5-2. HP NetRAID Assistant Main Menu Toolbar Options
• Adapter box: The Adapter box shows the number of the current adapter
that is being configured. If you installed one or more HP NetRAID Series
adapters in your HP NetServer, you can switch between the integrated
HP NetRAID controller and other HP NetRAID Series adapters by using
the Adapter box pull-down list. The integrated HP NetRAID controller is
always Adapter 0.
• Physical Devices box: The Physical Devices box contains one or two
channel columns, which show the physical drives on the SCSI channels of
the integrated HP NetRAID controller (or the currently selected adapter).
The number in parentheses to the right of each physical drive icon is its
SCSI ID (Target) on the channel.