Integrated HP NetRAID Controller Config. Guide

Chapter 5 Configuration

Preview Configuration

NOTE Refer to Worksheets A and B when checking the

configuration.

The HP NetRAID Assistant Wizard Configuration Preview window, shown in

Figure 5-6, displays the configuration proposed for the physical and logical

drives.

Figure 5-6. HP NetRAID Assistant Wizard Configuration Preview Window

NOTE The RAID level of a logical drive that spans arrays lacks the

terminal zero. Mentally add it to make RAID 1 into RAID 10,

RAID 3 into RAID 30, and RAID 5 into RAID 50.

To switch between showing logical drives and physical drives: Click Logical

View or Physical View.

To expand a view that has been collapsed (physical or logical drives, or hot

spares are hidden): Click the + sign in the yellow diamond.