Integrated HP NetRAID Controller Config. Guide

Chapter 5 Configuration
69
Step G. Save Configuration and Initialize
In this step, you will do the following:
• Save the configuration to a binary file
• Print a copy of the configuration
• Initialize the logical drives if you have not done so already
Save to Binary File
To save the configuration to a binary file:
1. Choose Save from the Configuration menu. The Save Configuration
dialog box appears.
2. Type the file name and directories to be used to save the configuration.
The file type should be *.cfg.
3. Click Save to save the configuration to the designated file.
Print Configuration
To print a copy of the configuration:
1. Choose Print from the Configuration menu.
2. Keep a copy of configuration Worksheets A and B together with the
printed copy of your configuration file. They help you understand your
configuration, or communicate with HP Customer Support.
Initialize Logical Drives
If you have not done so already, you must initialize your logical drives.
CAUTION Initializing a logical drive destroys all data currently on the
disk modules.
To initialize the logical drives you defined for the adapter in the HP
NetRAID Assistant Wizard:
1. If you installed one or more HP NetRAID Series adapters, click the
Adapter pull-down list and select the adapter.
2. Select the logical drives to be initialized.