Integrated HP NetRAID Controller Config. Guide

Chapter 6 HP NetRAID Software
80
NOTE For I
2
O operation under NetWare 4.2 or 5, load the NOS
manually, rather than using HP's automatic mode of NOS
installation.
Install HP NetRAID Series Driver
Load the appropriate driver(s) as instructed in the NOS Installation Instructions
that you printed in Step I earlier in this chapter. The driver names are listed in
Table 6-2.
NOTE For I
2
O operation under NetWare 4.2 or 5, load the
HP NetRAID I
2
O OSM and all necessary modules, as
described in your NetWare documentation. Also load the I
2
O
companion driver, mril4_xx.ham, which supports the
HP NetRAID Config utility. Do not load the non-I
2
O
NetRAID drivers. Remember to set the PCI class code to I2O
in Step L.
Table 6-2. HP NetRAID Drivers
Network Operating System HP NetRAID Drivers
Microsoft Windows 2000 mraid35x.sys
Microsoft Windows NT mraidnt.sys
Novell NetWare 4.2 and 5
(Conventional, non-I
2
O)
Mega4_xx.ham
Mega4_xx.ddi
Novell NetWare 4.2 and 5
(I
2
O support)
HP NetRAID I
2
O OSM
mril4_xx.ham
IBM OS/2 mraid.add
SCO OpenServer amird
SCO UnixWare mega