Integrated HP NetRAID Controller Config. Guide

Chapter 6 HP NetRAID Software
85
To Disable the HP NetRAID BIOS
If you want to prevent the system from booting from the integrated HP NetRAID
controller or from any of the following HP NetRAID Series adapters, you can
disable the HP NetRAID BIOS:
• HP NetRAID (D4943A)
• HP NetRAID-1 (D4992A)
• HP NetRAID-3Si (D5955A)
• HP NetRAID-1Si (D2140A)
To disable the HP NetRAID BIOS for all adapters in the system, choose Disable
BIOS from the Tools Management menu.
To Change the SCSI Transfer Rate
1. If you have installed one or more HP NetRAID Series adapters, select the
integrated controller or adapter controlling the SCSI channel on which
Fast/Wide or Ultra SCSI support is to be enabled:
◊ Choose Select Adapter from the Tools Management menu.
◊ Select the adapter controlling the SCSI channel of interest.
2. Choose Objects from the Tools Management menu.
3. Choose SCSI Channel from the Objects menu.
4. Select the channel on which the SCSI transfer rate is to be changed.
5. To change the SCSI transfer rate:
◊ Choose SCSI Transfer Rate from the SCSI Channel menu. A
submenu appears.
◊ Use the arrow keys to highlight your selection: Fast, Ultra, or Ultra2.
Press Enter.
◊ Choose Yes to confirm your selection.
6. Press Esc to return to the Tools Management menu.